A vape mod is the main power source in a vaping setup. It houses the battery (or batteries), controls power output, and often features adjustable settings like wattage and temperature. You attach a tank to the mod, which contains the coil and e-liquid. Mod boxes come in different sizes and designs, including single-battery and dual-battery types.

Box Mod Vape Kits

Q: Are vape mods allowed on planes?

Yes, but with restrictions. UK airline guidelines and international aviation rules allow vape mods in carry-on luggage only. Never place your vape mod or its batteries in checked baggage, as lithium batteries pose a fire risk. You must turn off the device during the flight and cannot use it onboard. Some airlines ask that you remove batteries and carry them in protective cases. Always check the airline's website before flying, as rules can differ slightly depending on the carrier and route.

Q: What’s the difference between a mod and a standard vape pen?

Vape pens are usually simpler devices with fixed or limited power settings. They're often used by beginners or casual vapers. Mods, on the other hand, offer more power, longer battery life, and full control over wattage, voltage, and temperature. Vape mods also support sub-ohm coils and a wider range of tanks. Pens are usually smaller and lighter, while mods are bulkier due to the extra features and battery size. If you want a stronger hit, denser vapour, or to fine-tune your vape, a mod gives you the tools to do that.

Q: What is the best vape mod?

"Best" depends on your needs. If you vape a lot and need long battery life, a dual-battery box mod with adjustable wattage might suit you. If you're after portability and simplicity, a smaller single-battery mod works well. Look for mods that offer protection features (like short-circuit and overheating cutoffs), solid wattage control, and compatibility with a wide range of tanks.

Q: How to choose a vape mod?

Start by looking at your vaping style. If you prefer strong vapour and direct lung inhale, get a mod that supports low-resistance coils and high wattage. Consider battery life; do you need one that lasts all day, or do you vape lightly? Look for mods with safety protections, accurate chipsets, and clear display screens.

Mod vapes provide you with more power, longer battery life, and greater vapour production. These awesome kits are designed for direct-to-lung (DTL) vaping draws, often recommended to advanced vapers. Vaporesso, SMOK, and VOOPOO are among the most popular vaping brands in this category. You can find refillable devices and even customise your coils (RTA, RDA, and RTDA) for a personalised experience.

Sorry, there are no products in this collection

How to Set Up Vape Mod Kits

First, fully charge your device. After charging, unscrew the top of the tank and fill it to the max line with your e-liquid. Next, connect the tank to the mod. To avoid dry hits, let the e-liquid soak into the coil for around 10 minutes. Finished? To turn on the mod, click the fire button five times quickly. The coil should have a range written on it that tells you what wattage to set it to. Begin at the lower end of that range and only go up if you need to. Start with short breaths to make sure the coil doesn't get too hot.

Best Coil Resistance for Box Mod Vape

Choosing the right coil resistance for your advanced vape is important. That is because the coil will define the taste and quality of vapour production. Box mod vapes support low-resistance coils (usually between 0.15 to 0.3 ohms). If you choose a high-resistance coil for these devices, you will end up with burnt tastes, harsh throat hits, and an overall poor vaping experience. Remember, using a 0.2-ohm coil on a 30W device won't work, and pushing a 1.2-ohm coil at 100W will burn it. Hence, whether you’re using rebuildable coils or pre-built ones, it’s important to ensure that their resistance is compatible with box vapes and supports high-wattage devices.

Best E-liquids for Vape Mod Kit

If you’re using a high-powered mod and sub-ohm coil, your e-liquid choice matters more than you might think. E-liquids are packed with 4 ingredients: Vegetable Glycerine (VG), Propylene Glycol (PG), Flavouring, and Nicotine (optional).

The PG is a thin liquid that carries flavour and gives a satisfying throat hit. On the other hand, VG is a thicker liquid that helps produce dense vapour. VG is derived from plant oils and gives a smoother, slightly sweet inhale. In addition, the food-grade flavourings are added to give e-liquids unique tastes, from fruit and menthol to desserts and tobacco. Another important ingredient, nicotine, is usually added to replicate the active substance found in tobacco. The nicotine strength for advanced kits is always low.

For setups that run at 100 watts or more, the ideal option is usually a 70/30 VG/PG ratio or anything with higher VG content. This thicker liquid helps produce large clouds and supports the faster wicking needs of sub-ohm coils.

Most vapers using this kind of setup stick to low nicotine strengths, like 3mg or 6mg. Since sub-ohm devices create more vapour, you end up inhaling more with each puff. Using anything stronger can feel too harsh and may hit too hard, especially if you're chain vaping.

Here’s what else to keep in mind:

Match your e-liquid to your coil: High VG in a high resistance coil (like 1.2 ohms) can clog or burn it. Thin e-liquid in a low-resistance sub-ohm coil may leak through the airflow ports.
Change the coil if you change liquid type: If you switch from 60/50 to 70/30 or the other way around, use a fresh coil. Mixing liquid types can cause gurgling or a burnt taste.
Consider wattage: Sub-ohm coils tend to work best with higher watts, depending on the resistance and liquid used.

Frequently Asked Questions

Are vape mods allowed on planes?

What’s the difference between a mod and a standard vape pen?

What is the best vape mod?

How to choose a vape mod?

What is a vape mod?

Sort by

Featured
Best selling
Alphabetically, A-Z
Alphabetically, Z-A
Price, low to high
Price, high to low
Date, old to new
Date, new to old