How to Refill a Hayati Pro Max – Step-by-Step Guide

The kit pairs a 2ml internal pod with a 10ml prefilled reservoir, giving you 12ml of e-liquid in total and up to 6000 puffs. A 1.2 ohm mesh coil handles the smooth mouth-to-lung draw, powered by a rechargeable 850mAh battery with USB-C charging. 

As you vape, gravity and air pressure feed liquid from the reservoir into the coil chamber automatically, so it tops itself up as you go. An LED display rounds out the hardware, along with a transparent pod tank so you can see liquid levels at a glance. Keeping the system sealed protects flavour consistency, stops leaks, and keeps the device within UK TPD tank capacity rules. 

When you fit a fresh reservoir or pod, follow this order to protect the coil and avoid a burnt puff. 

Remove all seals 

Remove the protected sticker, plastic caps, and silicone bungs from both the mouthpiece and the base of the replaceable pod assembly before anything else. These seals stop leaks in transit, and the device won't draw liquid properly until they are completely gone. 

Dock the reservoir 

Insert the 10 ml e-liquid bottle into the designated slot on the swappable pod housing and press upward firmly until you hear a distinct "click". This click indicates the internal valve has successfully pierced the bottle's factory seal. Once connected, slide the complete pod assembly into the top of the rechargeable battery base where the strong magnetic connection will secure it.

Tip it upside down

Turn the entire assembled device upside down for 10 to 15 seconds straight after docking. You should see small bubbles moving inside the transparent window, which is visual proof that the liquid is draining down to flood the 2ml coil chamber rather than sitting where it can't be drawn.

Prime the mesh coil

Stand the device completely upright and leave it alone for 5 to 10 minutes before taking your first vape. This gives the organic cotton inside the 1.2-ohm mesh coil enough time to get fully soaked. Skipping this step is the single most common cause of permanently burning a brand-new coil on the first hit. 

Draw to activation 

Once it is fully primed, simply inhale through the mouthpiece. The draw-activated system fires on its own without needing any buttons or setting adjustments. 

Why You Shouldn't Manually Refill It 

Although some users try to manually open the plastic housing and add their own e-liquid, this is not recommended. The pod is sealed for a closed-loop system for safety, performance, and leak prevention. Forcing it open can damage the seal, flood the coil, cause leaking, or affect the airflow sensor. It may also lead to weak vapour, burnt flavour, or device faults.  

For best results, use genuine replacement Hayati Pro Max Plus 6000 pods that match your device. UK vape products should also follow TPD rules and be MHRA registered. If you are using vaping as a way to stop smoking, NHS guidance on vaping can also be useful. 

How To Replace The Pod 

Replace the modular pod when the flavour tastes burnt, weak or flat; you may also notice less vapour, a tighter draw, or an empty reservoir. To replace it, pull the old complete pod housing straight out. It is usually held in place by a strong magnet, so it should come off easily. 

Discard the empty unit, then insert a fresh, sealed pod assembly by repeating the unboxing, clicking, flipping, and priming steps. Always choose a genuine pod that matches your device and flavour. You can shop Hayati Vapes online to find suitable Hayati options.

Can you refill Hayati Pro Max Plus? 

No, you cannot refill it like a normal pod; there is no fill hole for bottled e-liquid. The device uses a sealed 2ml chamber linked with a 10ml prefilled reservoir, so the liquid feeds into the pod as you vape. If you are comparing similar big puff options, you can also browse Buy Big Puffs prefilled pod kits online to see how these sealed systems work. 

Can you put your own e-liquid in a Hayati Pro Max? 

If you want to use your own choice of bottled e-liquid, the Hayati Pro Max Plus is not the right type of device. It is made for prefilled pods and closed-loop pod swap systems, not manual refilling. A refillable vape kit would be a better choice if you want to choose your own e-liquid, flavour, and nicotine strength. You can browse the best vape kits for open-system options. 

 Why does my Hayati Pro Max leak or have a burnt taste?

Leaks usually mean the reservoir bottle wasn't clicked completely into the pod housing to create a vacuum seal, or the device has been stored flat or in extreme heat. A burnt taste means the coil wasn't allowed to prime for the full 5–10 minutes, or the pod system has completely run out of juice, meaning it is time to fit a fresh one. 

Conclusion 

The Hayati Pro Max Plus is designed to be simple, clean, and entirely mess-free. You do not refill it by opening the pod or pouring in loose e-liquid. When the flavour drops or the integrated 12ml juice supply runs out, simply replace it with a genuine sealed replacement pod system, let it prime, and continue vaping. This keeps the device working properly and helps prevent leaks, burnt coils, and poor flavour. If you are comparing Hayati devices before buying, the Best Hayati Vape Kits guide can help you choose the right option for your needs.