1. Unpack and Check
Before doing anything else, confirm the box has everything it should: the battery, the pod module, and both 10ml pods. It's worth catching a missing part now rather than after you've already broken any seals.
2. Remove Every Seal
Peel the stickers and pull the silicone plugs from the mouthpiece and from both pods. It's easy to rush this step, but leaving even one plug in place stops e-liquid reaching the coil or air moving through the device properly.
3. Snap the Pods into the Module
Push each 10ml pod into the Snap Dual module until you feel it click into place. Both pods need to seat fully, or the module won't sit flush when you go to dock it.
4. Dock the Module onto the Battery
Slide the loaded module onto the battery body and press down until it locks. This is what connects the coil to the power source, so it should feel firm rather than loose or wobbly.
5. Wait 3-5 Minutes Before Your First Puff
This is the step most people skip, and it's the one that actually decides whether your first impression is good or bad. Give the coil a few minutes to absorb e-liquid before you fire it. Skip this and your first few puffs will taste scorched. That's not a fault with the device, just a dry coil catching up.
6. Inhale to Activate
There's no button to press. The Crown Bar 50K is draw-activated, so it fires as soon as you inhale through the mouthpiece.
7. Adjust the Airflow Ring
Twist the ring on the side of the device to suit your draw, tighter for an MTL pull, more open for bigger DTL clouds. There's no correct setting, so it's worth trying both in your first session.
8. Charge via USB-C
Once the battery indicator shows it's running low, plug in a USB-C cable. Charging it before it fully dies, rather than waiting for it to cut out mid-session. This helps keep the performance consistent over the life of the pod set.
Al Fakher Crown Bar 50K Vape Flavours
The Crown Bar 50K starter kit ships in 10 flavours:
- Blue Razz Lemonade
- Cool Mango
- Grape Mint
- Gum Mint
- Lemon Lime Cherry Fizz
- Lemon Mint
- Lush Ice
- Magic Love
- Peach Ice
- Two Apple
The pod module takes two separate 10ml pods, so you can load two different flavours at once and switch between them, rather than being locked into one for the whole 50,000 puffs.
Pros and Cons of Al Fakher Crown Bar 50K
Pros
- Very high puff count for the price
- Two pods let you run and mix different flavours
- Consistent flavour from the mesh coil
- Adjustable airflow for MTL or DTL vaping
- Fast USB-C charging
Cons
- Pods aren't manually refillable, you replace the whole set once empty
- First puff needs a short wait, which is easy to skip by mistake
FAQs
Which pods are compatible with the Al Fakher Crown Bar 50K?
Only Al Fakher Crown Bar 50K Hypermax Prefilled Pods are designed for this device. Pods from the 30K or other Crown Bar models aren't interchangeable.
Is it normal for the device to feel warm during use?
Yes, mild warmth during extended vaping sessions is normal for any mesh-coil device. If it becomes noticeably hot or you smell burning, stop using it and check the pod is placed correctly.
What nicotine strength is the Al Fakher Crown Bar 50K?
The Al Fakher Crown Bar 50K contains 20 mg nicotine strength, providing a satisfying nicotine hit with each puff.
Ready to Try the Crown Bar 50K?
Once it's set up, there's very little to think about: replace the pod set when flavour drops off, keep it charged, and it'll keep going. For a closer look at how it performs beyond the spec sheet, read our full Al Fakher Crown Bar 50K review here at Vape Gala.
