Voopoo Drag X3 80 W Pod Mod Kit

VOOPOO Drag X3 80W Pod Mod Kit

The VOOPOO Drag X3 is an adjustable pod mod kit with 5–80W output and support for a single external 18650 or 21700 battery, sold separately. The UK/TPD kit uses a 2ml PnP X DTL cartridge and includes 0.15Ω and 0.3Ω PnP X coils.

This is a more adjustable setup than a simple refillable pod kit. If you're comparing this type of device with other higher-powered options, our guide to vape mods explains the practical differences worth looking at.

PnP X Coil Compatibility

The Drag X3 uses the VOOPOO PnP X platform. When the supplied coils are finished, replace them with PnP X coils; older standard PnP coils are a different platform.

5–80W Adjustable Output

The device provides adjustable output from 5W to 80W, with a colour display for device information and settings. If you want to compare other hardware from the same manufacturer, browse the wider VOOPOO range.

18650 or 21700 Battery

The Drag X3 accepts one compatible external 18650 or 21700 battery. The battery is not included in the kit.

How to Use the VOOPOO Drag X3

• Install a suitable charged 18650 or 21700 battery with the correct polarity.
• Press-fit the required PnP X coil into the 2ml cartridge.
• Fill the cartridge and close the fill port securely.
• Allow a new coil several minutes to saturate.
• Attach the pod and set an appropriate output for the installed coil.
• Use the device controls to activate and adjust settings.

VOOPOO Drag X3 Specifications

• Output: 5–80W
• Battery: Single 18650 or 21700, sold separately
• UK capacity: 2ml
• Cartridge: PnP X DTL
• Included coils: 0.15Ω and 0.3Ω PnP X
• Display: 1.66-inch colour screen
• Charging: USB-C, 5V/2A

What's in the Box?

• 1 × VOOPOO Drag X3 device
• 1 × PnP X DTL 2ml cartridge
• 1 × 0.15Ω PnP X coil
• 1 × 0.3Ω PnP X coil
• 1 × USB-C cable
• 1 × user manual