How to Use the Al Fakher Crown Bar 30K: A Complete Guide

Vapers in the UK are relying on high-puff pod systems following the ban on disposable vapes in 2025. The Al Fakher Crown Bar Hypermax 30K is one of the most popular prefilled vape pod kits available for vapers looking for a higher puff capacity. 

This Al Fakher vape kit features advanced mesh coil technology, offers up to 30,000 puffs, and is available in 45 flavours. This guide will cover how to set up, use, refill, and charge the Al Fakher Crown Bar Hypermax 30K. Ready? Let’s get into it!

How to Open the Al Fakher Crown Bar Hypermax 30K Pod Kit?

To open the Al Fakher 30K Hypermax Pod Kit, unbox the device and remove all outer plastic wrapping. Peel off all protective tape, stickers, and rubber silicone plugs from the bottom of the pods or seals covering the coil contacts or mouthpiece.

These protective seals help prevent leaks during shipping and must be removed before use. If you are unsure about how to open the Al Fakher Crown Bar Hypermax 30K, consult the user manual or visit your nearest vape shop for professional assistance. Handling the device carefully helps prevent damage and ensures consistent performance.

How to Set Up the Al Fakher Crown Bar Hypermax 30K Pod Kit 

Below is the step-by-step process for setting up the Al Fakher Crown Bar Hypermax 30K :

• Unbox the Al Fakher 30K Hypermax Kit and you’ll find a device with two prefilled pods, a USB-C cable, and the user guide inside the box.

• Give the device a full charge using the USB-C cable. A full first charge helps the Al Fakher Crown Bar 30K deliver consistent power. 

• Remove any seals, then carefully align the pod with the slot on the device. As the Hypermax 30K uses a snap-fit design, all you need to do is gently push the pod into place until you feel a soft click. 

• Crown Bar Hypermax 30K comes with two 10ml refill containers. Lock them in place so they feed the pods as you vape, providing longer-lasting use. 

• Let the device sit for 5–10 minutes to allow the wicks to fully absorb the e-liquid and prevent dry hits or burnt taste when you first inhale.

• The Al Fakher Hypermax 30K is draw-activated, so there are no buttons to press. Simply take a gentle puff through the mouthpiece to activate the device and start vaping. 

How to Use the Al Fakher Crown Bar Hypermax 30K Pod Kit 

Follow the instructions below to use the Al Fakher Crown Bar 30K Hypermax after setting it up: 

Step 1: Take a Draw to Activate the Device

The Hypermax 30K is draw-activated, so there are no buttons to press. Simply inhale through the mouthpiece to activate the device. 

Step 2: Adjust Airflow 

Slide the airflow control depending on how you like to vape. A tighter draw feels more controlled, while opening it up gives you a more airy or looser inhale.

Step 3: Switch Flavours

The Al Fakher 30K Hypermax lets you switch between flavours with its dual-flavour pod system. Simply insert the second pod when you’re ready to switch flavours. 

Step 4: Take Slow Puffs

Take slow, steady puffs for a smoother experience. Avoid taking excessively long or fast draws, as this can affect your overall vaping experience.

How to Refill the Al Fakher Crown Bar Hypermax 30K? 

Al Fakher Crown Bar Hypermax 30K is a prefilled vape kit and is not designed for refilling. Attempting to refill it manually with a bottled e-liquid may damage the device. When the pod or attached refilling containers are empty, you have to replace the pod unit with a new one.

How to charge an Al Fakher Crown Bar Hypermax 30K? 

When the LED shows low power, recharge the device using a USB-C cable. Short top-ups keep performance consistent. The Al Fakher Hypermax 30K has an 850mAh rechargeable battery and charges through its USB-C cable.

1- Check the Battery Level:

Use the LED display to see how much battery is remaining. If it’s running low, it’s time to recharge.

2- Connect the USB-C Cable:

Plug the USB-C cable into the charging port on the device. Plug the device into a wall adapter or any power source.

3- Monitor the LED Indicator:

The LED display shows the battery level while charging, so you can easily see how close it is to being fully charged. 

4- Unplug Once Fully Charged:

Once the battery reaches full charge, disconnect the device, as overcharging can reduce battery health over time.

FAQs

How to Remove Al Fakher Hypermax Pods? 

The Al Fakher Hypermax Pod can be easily removed with a simple straight pull, so there’s no need to twist it. If you want to make sure it’s seated properly, gently take it out and reinsert it slowly so you can feel it lock into place with the magnets.

Where To Buy Al Fakher Crown Bar Hypermax 30K Pod Kit in the UK?

To ensure you’re getting an authentic product, buy the Al Fakher Hypermax 30K Pod Kit from your nearest local vape store or trusted online vape shop in the UK. 

When to Replace the Al Fakher Hypermax Pods?

If the flavour starts to fade or the draw feels tighter than usual, it’s time to replace the pod. 

How to Install the Al Fakher 30K Prefilled Pod?

To install the Al Fakher 30K Prefilled Pod, hold the device and gently pull the old pod straight out. Check the pod chamber and wipe away any e-liquid residue with a clean, dry tissue if needed. Remove the protective seals from the new pod, align it carefully with the slot on your device, and press it down until you feel a soft click.