Why Is My Al Fakher Vape Not Working: Common Issues & How To Fix Them
Below are some common issues with Al Fakher vapes and some troubleshooting tips to help you get your device up and running.
Device Doesn't Fire or Activate
Causes:
The Al Fakher Hypermax 30K is a draw-activated device, but if it doesn't fire when you take a puff, the child lock may be activated.
How To Fix Them?
The Al Fakher Crown Bar 30K comes with the child lock on by default. You must unlock it to activate the device. To unlock the device, take 5 short, quick puffs in succession without inhaling for vapour. Once the sequence is complete, the LED will indicate that the device is ready to use.
Vapour Tastes Burnt
Causes:
Hypermax 30K Vape Kit uses an advanced mesh technology that delivers dense vapour and better flavour due to its larger surface area than standard coils. However, it takes longer to absorb e-liquid when completely dry. If you vape before the wick is properly saturated, you may get a harsh, burnt taste because you've scorched the cotton wicking inside the coil.
How To Fix Them?
As prefilled pod kits like the Al Fakher Hypermax 30K are simpler to use than refillable vape kits, giving the e-liquid enough time to soak into the wick before vaping is still important. The e-liquid needs time to reach the coil from the reservoir, especially if the device has been stored on its side. All you need to do is attach the pod to the device. Wait for about 5 to 10 minutes for the e-liquid to soak into the wick. Then take 3 to 4 short, gentle puffs without inhaling the vapour. Wait another 2 minutes and vape as you normally do.
Not sure whether to choose the Al Fakher Hypermax 50K or 30K? Read our "Al Fakher Hypermax 50K vs 30K" guide to see how they compare in terms of battery life, technology, and flavour options.
Rapid Flashing And Device Not Working
Causes:
Al Fakher Hypermax 30K experiences a rapid 10-flash sequence, which means the protection circuit has triggered and the device has a connection problem or a depleted pod.
How To Fix Them?
Remove the pod from the device and check the connection pins on both the pod and device. If you notice any e-liquid residue or debris, clean the contacts with a dry cotton bud, then reinsert the pod until it clicks into place and take a test puff. If the rapid flashing continues, try different pods because persistent flashing across multiple pod points may indicate an issue with the device itself.
Want to know how to use the Al Fakher Crown Bar Hypermax 30K? Be sure to check out our guide on how to set it up, use it, and charge the device.
E-liquid Leakage
Causes:
E-liquid leakage is another common issue in Al Fakher vapes like Hypermax Prime 50K, which can be caused by a loose or damaged seal and improper pod installation. It could also be due to a damaged pod.
How To Fix Them?
In some cases, e-liquid may leak if the pod is not fitted properly, so remove it and reinsert it securely. To avoid the risk of leakage, it is best to store your device upright and keep the pod away from extreme temperatures, as heat can affect the e-liquid and increase the risk of leaking.
Al Fakher vape is not charging
Causes:
Wondering why your Al Fakher vape is not charging? This is because of a faulty cable or charger, battery damage, a dirty charging port, or internal issues.
How To Fix Them?
To fix the issue, carefully remove any dust or debris from the charging port using a dry brush or toothpick. Use a suitable charging cable, and plug the charger into another power outlet. If the device still doesn't charge, the battery may be faulty.
FAQs
Why is Al Fakher Vape Not Hitting?
Low battery, improper puffing technique, and blocked airflow are some of the causes of why your Al Fakher vape is not hitting or producing vapour. To fix this, take slow, steady puffs rather than drawing too hard, let the device rest between puffs, and avoid blocking airflow holes with fingers.
Where Can I Buy Al Fakher Vapes?
If you're looking to buy Al Fakher vapes in the UK, you can find them at Vape Gala, with competitive prices on Al Fakher pod kits and compatible pods. We also offer fast and reliable delivery across the UK, making it easy to get your favourite Al Fakher products delivered to your door.
How Do I Know When To Switch Pod Of Al Fakher Hypermax 30K?
Switch the pod of your Al Fakher Hypermax 30K when the flavour starts to fade, or the vapour becomes weaker. A tighter draw or a burnt taste can also be a sign that the pod needs replacing.
